√ 如何获得ETA证书？
如果建筑产品没有或没有完全涵盖任何统一的欧洲标准(EN)，并且评估方法和标准已在欧洲评估文件（EAD）中规定，则可以发布ETA。

因此，欧洲评估文件（EAD）构成了欧洲技术评估的基础。它包含评估产品的方法以及系统的规范，用于评估和验证要适用的性能认证体系（System系统）。如果相关产品尚未（完全）由现有EAD涵盖，EOTA将开发新的或适应现有的欧洲评估文件。

√ 谁可以获得ETA以及谁可以签发？
非标准建筑产品（或其授权代表）的制造商可以从根据“建筑产品法规”指定的技术评估机构（TAB）获得ETA。

√ 欧盟公告NB机构&TAB机构-捷克TZUS(NB1020)介绍
TZUS是欧盟公告号机构，其欧盟公告号为1020(Notified Body 1020-NB1020)。可以根据欧盟相关规定来签发CE证书。

TZUS同时也是ETA(European Technical Approval)的认证委员之一，可以根据相关法规来签发ETA证书。

ETA认证是在欧盟CE建筑产品法规Construction Products Regulation (EU) No. 305/2011背景下的辅助认证模式，欧盟CE认证目的是解除欧洲对于建筑建材产品的不同标准而可能导致的技术壁垒。当一个建筑产品于欧盟CE建筑产品法规之下没有对应的产品安全标准时，可以用ETA认证的方式来符合欧盟的法规。

√ 欧盟建材ETA认证目录/EADs认证目录
Legislation : Regulation (EU) No 305/2011 - Construction products

EAD 150003-00-0301 - High strength cement
EAD 010001-00-0301 - Precast concrete composite wall with point connectors
EAD 010003-00-0301 - Precast balcony elements made of ultra-high performance fibre reinforced concrete (UHPFRC)
EAD 010013-00-0301 - Lightweight panel made of mortar of cement and granulated EPS reinforced by a glass fibre mesh and an internal steel railing
EAD 010028-00-0103 - Shallow and reusable foundation kit for lightweight structures

EAD 020001-01-0405 - Multi-axis concealed hinge assemblies
EAD 020002-00-0404 - Balcony (and terrace) glazing system without vertical frames
EAD 020011-00-0405 - Roof, floor, wall and ceiling hatches providing access or for use as an emergency door / with or without fire resistance.
EAD 020029-00-1102 - Internal pedestrian fire resisting and/or smoke control single or double leaf doorsets made of steel
EAD 030019-00-0402 - Liquid applied roof waterproofing on the basis of polysiloxane

EAD 030065-00-0402 - Composite roof waterproofing kit
EAD 030092-00-0605 - Non-flexible mineral sealing slurry kit on the basis of cement
EAD 030218-00-0402 - Membrane for use as roof underlay
EAD 040005-00-1201 - Factory-made thermal and/or acoustic insulation products made of vegetable or anymal fibres
EAD 040007-00-1201 - Thermal insulation products for buildings with radiant heat reflective component

EAD 040010-00-1201 - Insulation product made of expanded perlite (EPB)
EAD 040011-00-1201 - Vacuum insulation panels (VIP) with factory applied protection layers
EAD 040012-00-1201 - thermal insulation board made of mineral material
EAD 040016-00-0404 - Glass fibre mesh for reinforcement of cement based renderings
EAD 040037-00-1201 - Low lambda composite boards made of mineral wool fibres and aerogel additives

EAD 040048-01-0502 - Rubber fibre mat to be used for impact sound insulation.
EAD 040049-00-0502 - Polyurethane (PU) foam mat to be used for impact sound insulation
EAD 040057-00-1201 - Thermal insulation board made of microporous silica
EAD 040065-00-1201 - Thermal insulation an/or sound absorbing boards based on expanded polystyrene and cement
EAD 040089-00-0404 - External Thermal Insulation Composite Systems with renderings for the use on timber frame buildings

EAD 040090-00-1201 - Factory-made boards and products formed by moulding of an expanded polylactic acid (E-PLA) for thermal and/ or acoustical insulation
EAD 040138-00-1201 - In-situ formed loose fill thermal and/or acoustic insulation products made of vegetable fibres
EAD 040287-00-0404 - Kits for external thermal insulation composite system (ETICS) with panels as thermal insulation product and discontinuous claddings as exterior skin
EAD 040288-00-1201 - Factory-made thermal and acoustic insulations made of polyester fibres

EAD 040313-00-1201 - In-situ formed loose fill thermal and/or acoustic insulation product made of granulated expanded cork
EAD 040369-00-1201 - Insulation made of loose-fill or compound granulated expanded cork
EAD 040394-00-1201 - Factory made cellular glass loose fill
EAD 040456-00-1201 - In-situ formed loose-fill thermal and/or acoustic insulation material made of animal fibres
EAD 040461-00-1201 - thermal insulation product made of loose fill expanded perlite (EP)

EAD 040635-00-1201 - Thermal and/or sound insulation based on bound expanded polystyrene bulk material
EAD 040643-00-1201 - Fiber reinforced silica aerogel thermal insulation
EAD 040650-00-1201 - Extruded polystyrene foam boards as load bearing layer and/or thermal insulation outside the waterproofing
EAD 040777-00-1201 - Cellular glass boards as load bearing layer and thermal insulation outside the waterproofing
EAD 050001-00-0301 - Load bearing thermal insulating elements which form a thermal break between balconies and internal floors

EAD 050004-00-0301 - Spherical and cylindrical bearing with special sliding material made of UHMWPE (Ultra high molecular weight poyethylene)
EAD 050009-00-0301 - Spherical and cylindrical bearing with special sliding material made of fluoropolymer
EAD 050013-00-0301 - Spherical and cylindrical bearing with special sliding material made of filled PTFE with solid lubricant and reinforcing fibres
EAD 060001-00-0802 - Chimney kit with clay/ceramic flue liner with classification T400 (minimum) N1 W3 Gxx
EAD 060003-00-0802 - Chimney kit with clay/ceramic flue liner and with specific outer wall with classification T 400 (minimum) N1 W 3 Gxx

EAD 060008-00-0802 - Chimney kit with clay/ceramic flue liner with classification T400 (minimum) N1/P1 W 3 Gxx and with different outer walls and possible change of outer wall
EAD 070001-01-0504 - Gypsum plasterboard for load bearing applications
EAD 070002-00-0505 - Glass fibre joint tape for gypsum plasterboards
EAD 080001-00-0403 - geocomposite for drainage system
EAD 080002-00-0102 - Non-reinforcing hexagonal geogrid for the stabilization of unbound granular layers by way of interlock with the aggregate

EAD 090001-00-0404 - Pre-fabricated compressed mineral wool boards with organic or inorganic finish and with specified fastening system
EAD 090017-00-0404 - Point supported vertical glazing
EAD 090019-00-0404 - Kits for ventilated external wall claddings of lightweight boards on subframe with rendering applied in situ with or without thermal insulation
EAD 090020-00-0404 - Kits for external wall claddings made of agglomerated stone
EAD 090034-00-0404 - Kit composed by subframe and fixings for fastening cladding and external wall elements

EAD 090035-00-1201 - Insulated glass unit with structural sealant punctually anchored
.   EAD 090058-00-0404
More Info EAD 090058-00-0404 - Ventilated external wall cladding kit comprising a metallic honeycomb panel and its associated fixings

EAD 120001-01-0106 - Microprismatic retro-reflective sheetings
EAD 120003-00-0106 - Steel lighting columns
EAD 120011-00-0107 - Flexible plug expansion joints for road bridges with flexible filling EAD 130002-00-0304 - Solid wood slab element - element of dowel jointed timber boards to be used as a structural element in buildings
EAD 130005-00-0304 - Solid wood slab element to be used as a structural element in buildings

EAD 130010-00-0304 - Glued laminated timber made of hardwood - structural laminated veneer lumber made of beech
EAD 130011-00-0304 - Prefabricated wood slab element made of mechanically jointed square-sawn timber members for use as structural element in buildings
EAD 130012-00-0304 - Strength graded structural timber - square edged logs with wane - chestnut
EAD 130013-00-0304 - Solid wood slab element to be used as a structural element in buildings - element of timber boards jointed by dovetail connections
EAD 130019-00-0603 - Dowel-type fasteners with resin coating

EAD 130022-00-0304 - Monolithic or laminated beam and wall logs made of timber
EAD 130033-00-0603 - Nails and screws for use in nailing plates in timber structures
EAD 130087-00-0204 - Modular construction system
EAD 130089-00-0304 - Structural wet and/or cold glued finger jointed solid timber
EAD 130090-00-0303 - Wood-concrete composite slab with dowel-type fasteners

EAD 130118-00-0603 - Screws for use in timber constructions
EAD 130166-00-0304 - Strength graded structural timber — steam-cured solid timber with rectangular cross section which may be finger jointed or not — softwood
EAD 130167-00-0304 - Strength graded structural timber - square edged logs with wane - softwood
EAD 130191-00-0304 - Prefabricated wood slab element made of jointed cross laminated log elements to be used as a structural element in buildings
EAD 130197-00-0304 - Glued laminated timber made of steam-cured solid timber with rectangular cross section – Softwood

EAD 140015-00-0304 - Walls, roofs and ceilings made of OSB-panels which are glued together on their surfaces
EAD 150001-00-0301 - Calcium sulphoaluminate based cement
EAD 150002-00-0301 - Calcium aluminate based refractory cement
EAD 150004-00-0301 - Rapid hardening sulfate resistant calcium sulphoaluminate based cement
EAD 150007-00-0301 - Portland-pozzolana cement for use in tropical conditions

EAD 150008-00-0301 - Rapid setting cement
EAD 150009-00-0301 - Blast Furnace Cement CEM III/A with assessment of sulfate resistance (SR) and optional with low effective alkali content (LA) and/or low heat of hydration (LH)
EAD 160003-00-0301 - Double headed studs for the increase of punching shear resistance of flat slabs or footings and ground slabs
EAD 160004-00-0301 - Post-tensioning systems for prestressing of structures
EAD 160012-00-0301 - Headed reinforcement steel bars

EAD 160027-00-0301 - Special filling products for post-tensioning kits
EAD 180003-00-0704 - Gully tops and manhole tops made of the polyamide (PA) for external vehicular and pedestrian areas
EAD 180008-00-0704 - Trapped gully - removable - mechanical closure
EAD 180018-00-0704 - Flexible couplings for gravity and pressure sewerage and drainage pipes
EAD 190002-00-0502 - Dry floating flooring kit based on prefabricated interlocked units made of ceramic tiles and rubber mats

EAD 190005-00-0402 - Terrace decking kit
EAD 200001-00-0602 - Prefabricated steel and stainless steel wire ropes with end connectors
EAD 200002-00-0602 - Tension Rod System
EAD 200005-00-0103 - Structural steel piles with hollow sections and rigid splices
EAD 200012-00-0401 - Spacer kits for built-up metal roof and wall claddin

EAD 200014-01-0103 - Pile Joints and Rock shoes for concrete piles
EAD 200017-00-0302 - Hot rolled products and structural components made of steel grades Q235B, Q235D, Q345B AND Q345D
EAD 200019-00-0102 - Hexagonal woven mesh gabion boxes and mattresses
EAD 200020-00-0102 - Weldmesh gabion boxes and mattress
EAD 200022-00-0302 - Thermo-mechanically rolled long steel products made of weldable fine grain structural steel of special steel grades

EAD 200026-00-0102 - Steel mesh systemss for reinforced fill
EAD 200032-00-0602 - Prefabricated tension rod systems with special end connectors
EAD 200033-00-0602 - Nailed shear connector
EAD 200035-00-0302 - Roof and wall systems with hidden fastenings
EAD 200036-00-0103 - Kit for micropiles — Kit with hollow bars for self-drilling micropiles — Hollow bars of seamless steel tubes

EAD 200039-00-0102 - Hexagonal woven gabion boxes and mattresses with zinc coatings
EAD 200043-01-0103 - Pile pipes made of ductile iron
EAD 200050-01-0102 - Gabion boxes, mattresses and sack gabions made of hexagonal regular twisted mesh with pre-coated zinc and/or zinc+organic coating.
EAD 200086-00-0602 - Wire ring connection products
EAD 210004-00-0805 - Modular element for building services

EAD 210024-00-0504 - Cement-bonded boards
EAD 220006-00-0402 - Roofing slates made of polypropylene, limestone and fillers
EAD 220007-00-0402 - Fully supported copperalloysheet and strip for roofing, externalcladding and internal lining
EAD 220008-00-0402 - Eaves profiles for terraces and balconies
EAD 220010-00-0402 - Flat plastic sheets for fully supported discontinuous roofing and external cladding

EAD 220013-01-0401 - Self–supporting ridgelight.
EAD 220018-00-0401 - Decentralized energy efficient low-pressure ventilation unit with alternating flow and heat recovery
EAD 220021-00-0402 - Sun tunnel kits
EAD 220022-00-0401 - Polycarbonate snow stopper for roof
EAD 220025-00-0401 - Cantilevered Structural horizontal glazing (structural glass canopy/roof)

EAD 220069-00-0402 - Flat and profiled (with a pattern) plastic roofing sheets made of recycled material for fully supported discontinuous roofing
EAD 230004-00-0106 - Wire ring mesh panels
EAD 230005-00-0106 - Wire rope net panels
EAD 230008-00-0106 - Double twisted steel wire mesh reinforced or not with ropes
EAD 230011-00-0106 - Road marking products

EAD 230012-00-0105 - Additives for asphalt production - bitumen granules made from recycled bituminous roofing felt
EAD 230012-01-0105 - additives for asphalt production - additive from bitumen granules made from recycled bituminous roofing felt
EAD 230025-00-0106 - Flexible facings systems for slope stabilization and rock protection
EAD 260001-00-0303 - Structural sections made from fibre reinforced polymers (FRP/Glassfiber Composites)
EAD 260002-00-0301 - Alkali resistant glass fibres containing zirconium dioxide for use in concrete

EAD 260006-00-0301 - Polymeric concrete addition
EAD 260007-00-0301 - Type I addition for concrete, mortar and screed materials – Aqueous solution
EAD 260009-00-0301 - Processed bottom ash from municipal solid waste incinerators as type II addition for production of concrete, mortar and grout
EAD 260035-00-0301 - Natural calcined pozzolana as type II addition for concrete
EAD 280001-00-0704 - Preassembled line unit for drainage or infiltration

EAD 290001-00-0701 - Kit for the transport of cold and hot water inside buildings
EAD 320002-02-0605 - Coated metal water stop sheet for construction and controlled crack joints in waterproof concrete
EAD 320008-00-0605 - Swellable joint sealing tape on the basis of bentonit for construction joints in watertight concrete
EAD 330001-00-0602 - Expanding Structural Bolting Assemblies for Blind Fastening
EAD 330008-02-0601 - Anchor channels

EAD 330011-00-0601 - Adjustable concrete screws
EAD 330012-00-0601 - Cast-in anchor with internal threaded socket
EAD 330014-00-0601 - Metal expansion fastener for use in autoclaved aerated concrete
EAD 330046-01-0602 - 330046-01-0602
EAD 330047-01-0602 - Fastening screws for sandwich panels

EAD 330075-00-0601 - Elevator lifting device
EAD 330076-00-0604 - Metal injection anchors for use in masonry.
EAD 330079-00-0602 - Floor fixing assemblies for use in checker plate or open bar grating
EAD 330080-00-0602 - High Slip Resistance Clamp (HSR) Assembly
EAD 330083-02-0601 - Power-actuated fastener for multiple use in concrete for non-structural applications.

EAD 330084-00-0601 - Steel plate with cast-in anchor
EAD 330087-00-0601 - Systems for post-installed rebar connections with mortar
EAD 330153-00-0602 - Cartridge fired pin for connections of thin gauge steel members and sheeting
EAD 330155-00-0602 - Self adjustable clamp assemblies
EAD 330196-01-0604 - Plastic anchors made of virgin or non-virgin material for fixing of external thermal insulation composite systems with rendering

EAD 330232-00-0601 - Mechanical fasteners for use in concrete
EAD 330389-00-0601 - Point connector of glass fibre reinforced polymer for sandwich walls
EAD 330499-00-0601 - Bonded fasteners for use in concrete
EAD 330667-00-0602 - Hot-rolled mounting channel
EAD 330747-00-0601 - fasteners for use in concrete for redundant non-structural systems

EAD 330924-00-0601 - Cast-in anchor bolts of ribbed reinforcing steel
EAD 330965-00-0601 - Powder actuated fastener for the fixing of ETICS in concrete
EAD 331852-00-0102 - spiral cable anchor
EAD 340002-00-0204 - Panels of steel wires with incorporated thermal insulation for a whole structure
EAD 340006-00-0506 - Prefabricated stair kits

EAD 340020-00-0106 - Flexible kits for retaining debris flows and shallow landslides/open slope debris flows
EAD 340025-00-0403 - Substructure kit for heated buildings
EAD 340037-00-0204 - Light weight steel/wood load bearing roof elements
EAD 350003-00-1109 - Kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of mechanically pre-coated steel sheet) and accessories
EAD 350005-00-1104 - Intumescent products for fire sealing and fire stopping purposes

EAD 350022-01-1107 - Kit for closure system for conveyor systems
EAD 350134-00-1104 - Fire proof water trap with intumescent fire seal (combined with a stainless steel floor gully penetration)
EAD 350140-00-1106 - Renderings and rendering kits intended for fire resistant applications
EAD 350141-00-1106 - Linear joint and gap seals
EAD 350142-00-1106 - Fire protective board, slab and mat products and kits

EAD 350402-00-1106 - Reactive coatings for fire protection of steel elements
EAD 350454-00-1104 - Fire stopping and fire sealing products - Penetration seals
EAD 360001-00-0803 - Ventilation system made of mineral wool covered with film (outside and EAD 360005-00-0604 - Cavity tray

睿督SMART提供ETA认证，ETA报告，ETA评估报告，锚栓ETA认证，化学锚栓ETA认证，车修壁虎ETA认证，植筋胶ETA认证，阻火圈ETA认证，石笼网ETA认证，干挂系统ETA等产品的ETA认证服务

南京睿督公司为欧盟公告号Notified Body实验室授权合作实验室，可以直接受理建材CE认证及ETA认证。

南京睿督公司咨询电话：025-8658 3475    400-603-6575
网址：www.hksmartps.com    www.cprce.com 
邮箱：info@hksmartps.com  
微信：firetesting  或 17714189018

……